Outils pour utilisateurs

Outils du site


Action disabled: media
admin:services:monit

< retour à la page de l'administration technique

Zertrin monitore les services de federez via son serveur perso (zertrin.org) avec monit. Cf config actuelle : https://haste.zertrin.org/rafugamege.txt (NB: federez-monit@zertrin.org est une redirection vers federez@googlegroups.com qui est la mailing de secours de l'équipe technique)

FIXME Documentation du monitoring à Federez sur les serveurs.

Mise en place

Lors de l'install d'un nouveau serveur, il vaut mieux installer monit pour surveiller les services de base et autres.

apt-get install monit 

Ensuite, on paste la conf suivant dans /etc/monit/monitrc :

# Configuration de monit
# On ne met ici que les réglages généraux, la liste des services monitorés est dans services
# On peut rajouter des conf particulières dans le conf.d


set daemon 60

set logfile /var/log/monit.log

set mailserver localhost, smtp.crans.org

set alert monitoring@federez.net { uid gid size nonexist data icmp invalid exec timeout resource checksum timestamp connection permission }

# Local host doit pouvoir contacter monit
set httpd port 2812 and
    use address localhost  # only accept connection from localhost
    allow localhost        # allow localhost to connect to the server and

set mail-format {
      from: monit@$HOST
   subject: monit alert --  $EVENT $SERVICE
   message: $EVENT Service $SERVICE
                 Date:        $DATE
                 Action:      $ACTION
                 Host:        $HOST
                 Description: $DESCRIPTION

            Monit, unique employé de federez,
 }

include /etc/monit/services
include /etc/monit/conf.d/*

Pour terminer, on met dans /etc/monitrc les services qu'on souhaite monitorer.
De base, il est nécessaire de monitorer ssh, nslcd, nscd et munin-node.

A adapter en fonction des services présents sur la bète.

# Services gérés par monit 

# freeradius
check process freeradius with pidfile /var/run/freeradius/freeradius.pid
    start program = "/etc/init.d/freeradius start"
    stop program = "/etc/init.d/freeradius stop"
    if 5 restarts within 5 cycles then timeout

# nslcd
check process nslcd with pidfile /var/run/nslcd/nslcd.pid
    start program = "/usr/sbin/service nslcd start"
    stop program = "/usr/sbin/service nslcd stop"
    if failed unixsocket /var/run/nslcd/socket then restart
    if 5 restarts within 5 cycles then timeout

# nscd
check process nscd with pidfile /var/run/nscd/nscd.pid
    start program = "/usr/sbin/service nscd start"
    stop program = "/usr/sbin/service nscd stop"
    if failed unixsocket /var/run/nscd/socket then restart
    if 5 restarts within 5 cycles then timeout


# fail2ban
check process fail2ban with pidfile /var/run/fail2ban/fail2ban.pid
    start program = "/etc/init.d/fail2ban start"
    stop program = "/etc/init.d/fail2ban stop"
    if failed port 22 protocol ssh timeout 30 seconds then restart
    if children > 200 then restart
    if 5 restarts within 5 cycles then timeout

# ssh
check process ssh with pidfile /var/run/sshd.pid
    start program = "/etc/init.d/ssh start"
    stop program = "/etc/init.d/ssh stop"
    if failed port 22 protocol ssh timeout 30 seconds then restart
    if children > 200 then restart
    if 5 restarts within 5 cycles then timeout


# munin-node
check process munin-node with pidfile /var/run/munin/munin-node.pid
    start program = "/usr/sbin/service munin-node start"
    stop program = "/usr/sbin/service munin-node stop"
    if 5 restarts within 5 cycles then timeout
admin/services/monit.txt · Dernière modification : 2019/04/10 15:09 de zertrin

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki